Rashtriya Chemicals and Fertilizers Limited has announced 326 apprenticeship vacancies for the 2026-27 training session at its Trombay and Thal units in Maharashtra. The recruitment covers Graduate Apprentice, Technician Apprentice and Trade Apprentice positions for candidates from graduation, diploma, B.Sc and selected 12th-level backgrounds. The online application process started on 4 September 2026, and eligible candidates can apply until 20 September 2026 at 5 PM. Selection will be based primarily on merit from the prescribed qualifying examination, followed by document verification and apprenticeship formalities.
RCF Apprentice Recruitment 2026 at a Glance
| Particular | Details |
|---|---|
| Organization | Rashtriya Chemicals and Fertilizers Limited |
| Recruitment | RCF Apprentice Recruitment 2026-27 |
| Total Vacancies | 326 |
| Graduate Apprentice | 145 |
| Technician Apprentice | 105 |
| Trade Apprentice | 76 |
| Training Units | Trombay, Mumbai & Thal, Raigad |
| Application Mode | Online |
| Application Start | 4 September 2026 |
| Last Date | 20 September 2026, 5 PM |
| Age Limit | 18 to 25 years |
| Selection | Merit-Based Selection |
| Training Duration | 12 to 24 months, depending on trade |
The recruitment is intended for apprenticeship training rather than direct permanent employment. Candidates should therefore consider the opportunity primarily as a way to gain structured industrial experience and practical exposure.
RCF Apprentice Vacancy 2026
The 326 positions are divided into three major apprenticeship categories:
- Graduate Apprentice: 145
- Technician Apprentice: 105
- Trade Apprentice: 76
Across the two RCF units, 177 apprentices are proposed at Trombay and 149 at Thal.
Graduate Apprentice: 145 Vacancies
Graduate candidates can apply for the following training areas:
| Training Area | Qualification | Trombay | Thal | Total |
|---|---|---|---|---|
| Accounts Executive | B.Com, BBA or Graduation with Economics | 25 | 25 | 50 |
| Secretarial Assistant | Any Graduate | 35 | 25 | 60 |
| Recruitment Executive (HR) | Any Graduate | 20 | 15 | 35 |
| Total | 80 | 65 | 145 |
The Graduate Apprentice category provides opportunities beyond engineering. Candidates from commerce, business, economics and general graduation backgrounds can find suitable options depending on the prescribed qualification.
Technician Apprentice: 105 Vacancies
Diploma holders have opportunities across several engineering disciplines.
| Discipline | Required Qualification | Trombay | Thal | Total |
|---|---|---|---|---|
| Diploma Chemical | Diploma in Chemical Engineering | 10 | 10 | 20 |
| Diploma Civil | Diploma in Civil Engineering | 9 | 6 | 15 |
| Diploma Computer | Diploma in Computer Engineering | 5 | 5 | 10 |
| Diploma Electrical | Diploma in Electrical Engineering | 10 | 10 | 20 |
| Diploma Instrumentation | Diploma in Instrumentation Engineering | 10 | 10 | 20 |
| Diploma Mechanical | Diploma in Mechanical Engineering | 10 | 10 | 20 |
| Total | 54 | 51 | 105 |
Chemical, Electrical, Instrumentation and Mechanical diploma holders each have 20 vacancies, making these some of the larger opportunities in the Technician Apprentice category.
Trade Apprentice: 76 Vacancies
The Trade Apprentice category contains both specialised science-based positions and selected 12th-level trades.
| Trade | Qualification | Trombay | Thal | Total |
|---|---|---|---|---|
| Attendant Operator, Chemical Plant | B.Sc with Physics, Chemistry & Mathematics, Chemistry major | 35 | 15 | 50 |
| Instrument Mechanic, Chemical Plant | B.Sc with Physics, Chemistry & Mathematics, Physics major | 2 | 2 | 4 |
| Laboratory Assistant, Chemical Plant | B.Sc with Physics, Chemistry & Mathematics, Chemistry major | 2 | 4 | 6 |
| Boiler Attendant | 12th with Science | 1 | 1 | 2 |
| Electrician | 12th with Science or equivalent | 1 | 5 | 6 |
| Horticulture Assistant | 12th or equivalent | 2 | 4 | 6 |
| Medical Laboratory Technician | 12th with Science | 0 | 2 | 2 |
| Total | 43 | 33 | 76 |
The Attendant Operator, Chemical Plant position accounts for 50 of the 76 Trade Apprentice vacancies and therefore represents the largest opportunity within this category.
RCF Apprentice Eligibility 2026
Eligibility differs substantially between the three apprenticeship categories. Candidates should match their qualification with the exact discipline instead of applying based only on the general apprentice title.
Educational Qualification
Graduate Apprentices require the relevant graduation qualification. Technician Apprentices require the prescribed engineering diploma, while Trade Apprentice eligibility varies by individual trade.
Some Trade Apprentice positions require a B.Sc with specific combinations of Physics, Chemistry and Mathematics, while others accept 12th with Science or an equivalent qualification.
The qualifying course should generally be a recognised regular full-time programme. Candidates should also carefully check the passing-year condition.
The notification specifies that the relevant passing certificate or final-year mark sheet should be dated on or after 1 July 2023.
Candidates Who May Not Be Eligible
Candidates should pay attention to the restrictions applicable to apprenticeship recruitment.
Those who have:
- Already completed Act Apprentice training,
- One year or more of relevant job experience, or
- Are pursuing higher studies,
may not be eligible under the applicable apprenticeship conditions.
Therefore, candidates should not assume that having the required educational qualification automatically makes them eligible.
RCF Apprentice Age Limit
The general age requirement is:
- Minimum: 18 years
- Maximum: 25 years
The age is calculated as on 1 September 2026.
Applicable relaxation is available for eligible categories:
| Category | Age Relaxation |
|---|---|
| SC/ST | 5 years |
| OBC | 3 years |
| PwBD | 10 years |
| Children/Family Members of 1984 Riot Victims | 5 years |
Candidates should calculate their age using the prescribed cut-off date rather than their age on the day they submit the application.
RCF Apprentice Stipend 2026
The stipend depends on the apprenticeship category and trade.
| Apprenticeship | Monthly Stipend |
|---|---|
| Graduate Apprentice | ₹17,300 |
| Technician Apprentice | ₹15,900 |
| AOCP, IMCP & LACP | ₹17,300 |
| Other listed Trade Apprentices | ₹14,600 |
RCF also provides certain facilities to apprentices according to company rules, which may include canteen support, OPD medical facilities, uniform and personal protective equipment.
However, candidates should clearly understand that apprenticeship training is not the same as regular employment. Completion of the training does not guarantee permanent employment with RCF.
Training Location: Trombay or Thal
Apprentices will be trained at one of two RCF locations:
- Trombay, Mumbai
- Thal, Raigad, Maharashtra
Candidates are required to select their preferred training unit during the application process.
This choice should be made carefully because the training location is not something candidates should expect to change later. Applicants should consider travel, accommodation and other practical requirements before selecting the unit.
The general training schedule is also different between categories. Graduate Apprentices generally follow a 9 AM to 6 PM schedule, while Technician and Trade Apprentices generally follow an 8 AM to 5 PM schedule, subject to weekly offs and holidays.
How RCF Will Select Apprentices
Unlike regular RCF recruitment for permanent posts, this apprenticeship selection does not involve a conventional competitive written examination.
The selection is primarily based on the marks obtained in the prescribed qualifying examination, subject to the applicable reservation and eligibility conditions.
The process broadly involves:
Online Application → Merit List → Shortlisting → Document Verification → Apprenticeship Contract → Joining
Candidates with CGPA, CPI or grades instead of percentage marks must use the official conversion method prescribed by their educational institution.
This makes accurate academic information particularly important. Candidates should enter their marks exactly as supported by their original documents.
NATS and NAPS Registration
Apprenticeship portal registration is an important part of this recruitment.
Depending on the apprenticeship category, candidates may need registration through:
- NATS for applicable Graduate and Technician Apprentices
- NAPS for applicable Trade Apprentices
Candidates should complete the relevant registration before attempting the RCF application if required by their category.
A common mistake is to treat portal registration as a minor formality and leave it until the final day. It is better to complete the applicable apprenticeship registration early and keep the registration number available.
Important Dates
| Event | Date |
|---|---|
| Online Application Starts | 4 September 2026, 8 AM |
| Last Date to Apply | 20 September 2026, 5 PM |
The application window is relatively short. Candidates should not wait until the final few hours because registration, document preparation and portal-related issues can delay submission.
Documents Required
Candidates should keep their documents ready before starting the application.
Commonly required documents include:
- Recent passport-size photograph
- Signature
- Aadhaar Card
- PAN Card
- Educational certificates
- Relevant semester/year mark sheets
- SSC certificate or accepted date-of-birth proof
- Caste certificate, where applicable
- OBC-NCL certificate, where applicable
- EWS certificate, where applicable
- CGPA-to-percentage conversion certificate, if applicable
- Bank account details in the candidate’s own name
- NATS registration details, where applicable
- NAPS registration details, where applicable
A medical fitness certificate in the prescribed format may also be required at the reporting or joining stage.
Candidates should ensure that their name, date of birth and educational details are consistent across the documents.
How to Apply for RCF Apprentice Recruitment 2026
Eligible candidates can apply online through the RCF apprenticeship recruitment system.
Step-by-step application process
- Visit the official RCF website.
- Open the recruitment section.
- Find the Apprentice Recruitment 2026-27 notification.
- Read the complete advertisement for your apprenticeship category.
- Complete the applicable NATS or NAPS registration.
- Open the RCF online application.
- Select the appropriate apprenticeship discipline.
- Choose Trombay or Thal as the preferred training location.
- Enter personal and educational details.
- Enter marks exactly according to the original mark sheets.
- Upload the required photograph and signature.
- Review the application carefully.
- Submit the form before the deadline.
- Save or print the final submitted application for future reference.
Candidates should avoid submitting multiple applications for different disciplines when the notification permits only one application.
Common Mistakes to Avoid
The most common errors in apprenticeship applications are usually related to qualification matching and documentation.
Avoid the following:
- Applying for a discipline that does not exactly match your qualification.
- Ignoring the passing-year condition.
- Entering incorrect marks.
- Using an incorrect CGPA-to-percentage conversion.
- Forgetting NATS or NAPS registration.
- Selecting the wrong training unit.
- Uploading an incorrect photograph or signature.
- Submitting multiple applications where only one is permitted.
- Assuming apprenticeship training guarantees permanent employment.
- Waiting until the last day to complete the application.
Candidates should also check whether they have already completed apprenticeship training or have relevant employment experience that affects their eligibility.
Who Should Apply?
RCF Apprentice Recruitment 2026 is particularly suitable for candidates who want to gain practical experience after completing their education.
Graduates can consider Accounts Executive, Secretarial Assistant and Recruitment Executive training.
Diploma holders have dedicated opportunities in Chemical, Civil, Computer, Electrical, Instrumentation and Mechanical disciplines.
B.Sc candidates with the specified science combinations can consider the specialised chemical plant and laboratory-related apprenticeship positions.
Candidates with 12th Science or equivalent qualifications can also find opportunities in selected Trade Apprentice categories.
The recruitment is therefore broader than a typical engineering apprenticeship drive, but candidates still need to match the exact qualification and trade requirements.
CareerAlert24 Insight
The biggest advantage of this RCF recruitment is the breadth of qualifications covered by the 326 vacancies. Candidates do not need to be engineering graduates to find an opportunity. Commerce graduates, general graduates, engineering diploma holders and candidates from specified science backgrounds all have separate apprenticeship routes.
However, the selection process makes academic marks especially important because there is no conventional written examination to compensate for a weaker qualifying score.
Candidates should also think carefully about the Trombay versus Thal choice. The training unit should be selected based on practical convenience rather than simply choosing the location with more vacancies.
Most importantly, applicants should treat this as a structured training opportunity, not as a permanent RCF job. The real value is the industrial exposure, practical training and experience gained during the apprenticeship.
Preparation Tips for Merit-Based Selection
Since there is no regular competitive written examination, candidates should focus on application accuracy rather than traditional exam preparation.
Before submitting the form:
- Verify your exact qualification against the selected discipline.
- Check your passing date.
- Recalculate your percentage if necessary.
- Keep the official CGPA conversion certificate ready.
- Complete NATS/NAPS registration early.
- Check your category certificate.
- Verify your bank account details.
- Decide between Trombay and Thal before starting the application.
- Keep scanned documents in the required format.
- Save the final application after submission.
Candidates shortlisted for document verification should be prepared to produce the original certificates supporting the information entered in the application.
Important Links
| Purpose | Link |
|---|---|
| Apply Online | RCF Apprentice Application |
| Official Notification | RCF Apprentice Recruitment Notification |
| Official RCF Website | RCF Limited |
| NAPS Registration | Apprenticeship India |
| NATS Registration | NATS Portal |
| WhatsApp Updates | CareerAlert24 WhatsApp Channel |
| Telegram Updates | CareerAlert24 Telegram Channel |
Frequently Asked Questions
How many vacancies are available in RCF Apprentice Recruitment 2026?
RCF has announced 326 apprenticeship vacancies for the 2026-27 training session.
What are the three apprenticeship categories?
The vacancies are divided into 145 Graduate Apprentice, 105 Technician Apprentice and 76 Trade Apprentice positions.
What is the last date to apply?
The last date for submitting the online application is 20 September 2026 at 5 PM.
Is there a written exam for RCF Apprentice Recruitment?
No conventional competitive written examination is prescribed as the primary selection method. Candidates are shortlisted through the prescribed merit process based on their qualifying examination marks, followed by document verification and apprenticeship formalities.
What is the RCF Apprentice stipend?
The stipend depends on the category. Graduate Apprentices receive ₹17,300 per month, Technician Apprentices receive ₹15,900, while the listed Trade Apprentice positions carry either ₹17,300 or ₹14,600 depending on the trade.
Where will the apprenticeship training take place?
Training will be conducted at RCF’s Trombay unit in Mumbai or Thal unit in Raigad, Maharashtra.
What is the age limit?
The general age limit is 18 to 25 years as on 1 September 2026, with applicable relaxation for eligible categories.
Does completing the apprenticeship guarantee a permanent RCF job?
No. Apprenticeship training does not create an automatic right to regular employment with RCF.
Is NATS or NAPS registration required?
The applicable apprenticeship portal registration is required according to the category. Candidates should complete the relevant NATS or NAPS registration and keep the registration details ready before applying.
Conclusion
RCF Apprentice Recruitment 2026 offers 326 apprenticeship opportunities across Graduate, Technician and Trade categories at the Trombay and Thal units in Maharashtra. The recruitment covers a wide range of candidates, including graduates, engineering diploma holders, B.Sc candidates and eligible 12th-level applicants.
Because selection is merit-based, candidates should focus on accurate academic details, correct qualification matching and complete documentation. Completing the relevant NATS or NAPS registration in advance is also important.
The online application window runs from 4 September to 20 September 2026 at 5 PM. Eligible candidates should read the official notification carefully, select the appropriate discipline and training location, and submit the application well before the deadline.
